Home > News > Film Blowing Machine News

Master PE blown film machine works, production of high quality PE film
PE film blowing machine is the majority of manufacturers and system manufacturers are familiar with the film , but many manufacturers but for his works and the little -known film technology , many manufacturers making use of PE PE film blowing machine , always can not grasp technology , blown film instability , obviously selected high quality raw materials PE , PE blown film is always transparency , flexibility, uneven thickness , which are hand- blown process, high and low temperature , wind speed , how much traffic and other factors affected.
PE blown film projects include heating , traction , rolling process , heat is divided into five districts . One , two , three zones of the heating zone ( pre-heating) , the temperature is gradually increased, the temperature control is very important , the material is not easy too low , high temperature easily modified , turned . 80 blown film machine, for example , a lower area about 170 ℃, the higher two districts later. Fourth District (three zones ) as a heating zone , mainly with a filter , you can filter and prevent impurities in raw materials into five districts , transparency PE blown film , smoothness decision is to have the filter , the filter the number of large mesh ( cyberspace is small ) filtered greater detail , making the film more smooth , but the mesh is too small , would cause retention of raw materials. Five areas of the feed zone , this link is essential for temperature and flow need to strictly control the entire heating process to come to a suitable degree of control the situation according to the discharge port , high impact molded films are low , with five areas blowers and accelerate forming a film , while the film opening film thickness non-uniformity required by the membrane head Screws to adjust.
Traction District accessories are playing pump , blowing holes through the membrane aerated head , straight up into the film , the film is used to control the size . Then after a steady film is a " stable film ." Adjust speed host and traction , you can control the thickness of the film ( the host faster speed , feed speed on the fast , film on thick, thinner and vice versa ) this is the most important aspect.
    Master has a PE blown film machine works , we can produce high-quality PE film.

Product Search

Contact Us


    TEL: 0086 577-66886398 / 66809311
    FAX: 0086 577-66886498
    ADD: Building D20, Zhihui Industrial Park, No. 33, Tingchao Road, Shangwang Street, Ruian City, Zhejiang Province-1-2
    Mail: 23541115@qq.com

All rights reserved?Ruian City DeBang Machine Co.,Ltd.   

XML 地图 | Sitemap 地图